Mobile Version

About Us      |      Contact Us

  Family-run since 1981

  ISO 9001 certified

  Waste transfer licence

  On-site DGSA

  ADR-trained drivers

  Same-day dispatch

Water & Environmental Testing

Discover Water & Environmental Testing from Ocon Chemicals, a leading supplier of laboratory products in Ireland. The range includes reagents, instruments, test kits and sampling equipment, ideal for teams analysing water quality. We focus on stocking dependable, quality-assured items so your work stays on track without compromise. Take a look through the options below, review the specifications that matter to you, and place your order online for fast, reliable delivery to labs right across the country.

placeholder

Enquire about stock levels

Anionic Surfactants Cuvette Test...

Code: HLCK331

Per PK 25

€200.20 ex VAT

- +

placeholder

Enquire about stock levels

Alkalinity test kit 5-100/20-400mg/L PK...

Code: H2444301

Per PK 100

€148.00 ex VAT

- +

placeholder

Enquire about stock levels

Alkalinity Hi/Low Drop Test Kit Each

Code: LIA-K100461

Per EACH

€142.27 ex VAT

- +

placeholder

Enquire about stock levels

Test Strip, Peracetic Acid 2000

Code: F11817073

€55.75 ex VAT

placeholder

In stock

Ready to ship immediately!

Peracetic acid test strips low range...

Code: J167.5C

€54.00 ex VAT

placeholder

Enquire about stock levels

Peracetic Acid Test Strip High Range...

Code: LIA-LE/3000HR

Per Pk 50

€55.12 ex VAT

Showing products per page

Water & Environmental Testing Frequently Asked Questions

Water test strips, tablet/powder reagents or cuvette tests. Which should I use?

Test strips give very quick and low-cost spot checks and on-site screening. Tablet and powder-pillow reagents suit colour-comparator and titration methods. For better accuracy at low cost. Cuvette (tube) tests are read on a photometer. This is for precise, traceable results over a big range of parameters. Ocon Chemicals supplies all three formats. And calibration standards to keep results accurate.

How do I test chlorine in water? And what's the difference between free and total chlorine?

Free chlorine is the active disinfectant available to kill microorganisms. Total chlorine also includes in it, combined chlorine (chloramines). DPD reagents measure free chlorine instantly. And a further reagent gives total chlorine, the difference is the combined fraction. Test with DPD tablets, powder pillows or strips. Or a photometer for precise readings. Ocon Chemicals has the full DPD range ready to go.

How do I test water hardness? And what do the units mean?

Water hardness measures dissolved calcium and magnesium. It's reported as milligrams per litre (mg/L, or ppm) of calcium carbonate. Or it can be in German degrees (°dH). You can measure it with test strips. Also with tablet titration kits or a photometer. Ocon Chemicals has got all the hardness strips, tablets, reagents and test kits ready to go.

What is turbidity? And how is it measured?

Turbidity is the cloudiness of water. It’s caused by suspended particles. It's measured in NTU (Nephelometric Turbidity Units). It can be done using a turbidimeter that detects scattered light. It's a key indicator of water quality and filtration performance. Instruments are usually calibrated with Formazin or StablCal standards. Ocon Chemicals has got all the turbidity standards, calibration sets and replacement vials ready to go in our warehouse.

What's the difference between COD, BOD and TOC?

All three measure organic pollution in water. COD (chemical oxygen demand) uses a chemical oxidant in a heated tube. It gets you results in about two hours. BOD (biochemical oxygen demand) measures the oxygen used by microorganisms over five days. TOC measures the total organic carbon directly. Here at Ocon Chemicals, we've got all COD, BOD and TOC cuvette tests, reagents, thermoreactors and standards. This includes mercury-free COD.

How do I test for nitrate, nitrite, ammonia and phosphate in water?

These nitrogen and phosphorus parameters show us nutrient pollution. From agriculture, wastewater or aquaculture. And they’re used to monitor treatment performance. Measure them with test strips for quick screening. Or with cuvette tests and reagents on a photometer. This will get you accurate, quantified results across different ranges. Ocon Chemicals has got all the strips, powder reagents and cuvette tests for each parameter.

How should I collect a water sample for testing?

Get a clean or sterile sampling bottle. Fill it properly and avoid touching the neck or cap. Choose bottles containing sodium thiosulfate for chlorinated or drinking water. They will neutralise residual chlorine so it doesn't keep on reacting before analysis. Label the samples. Keep them cool. And test them promptly. Ocon Chemicals has got sterile water sampling bottles. And they've got dippers and telescopic sampling rods.

Does Ocon Chemicals test water samples? Or supply water-testing products?

Ocon Chemicals supplies all the products used to test water. They supply reagents, test strips, kits, cuvette tests, photometers, standards and sampling equipment. They work with laboratories, industry and utilities across Ireland. From Cork and Dublin to Galway and Donegal. For accredited analysis of a sample, an accredited testing laboratory carries out the testing. We're an Irish, family-run business. A ISO 9001-accredited, REACH-compliant supplier operating since 1981.